Phlex tek
Phlex tek
  • Home
  • Applications
    • 3D Printing
    • Composites
    • Coatings & Inks
    • Adhesives & Sealants
    • Fiber Sizing
    • Drum Lining
  • Products
    • Nitrosize LS-01
    • Nitrosize UPW-36
    • NitroSize WBP-34
    • NitroSize ES-55
    • NitroRez ES-P30P
    • NitroRez ES-P40M
    • ACH CER 15
    • ACH CER VCMX
    • ACH EPY 500
    • ACH EPY 520
    • ACH Pellet Si PS-101
    • ACH Si PYL-43C
    • ACH Si-ALK-137
    • ACH Si-SUL-69
    • ACH TP-101
    • ACH TP-221
    • ACHWL CER 4221
    • ACH-TPO
  • Blog
  • Contact
  • More
    • Home
    • Applications
      • 3D Printing
      • Composites
      • Coatings & Inks
      • Adhesives & Sealants
      • Fiber Sizing
      • Drum Lining
    • Products
      • Nitrosize LS-01
      • Nitrosize UPW-36
      • NitroSize WBP-34
      • NitroSize ES-55
      • NitroRez ES-P30P
      • NitroRez ES-P40M
      • ACH CER 15
      • ACH CER VCMX
      • ACH EPY 500
      • ACH EPY 520
      • ACH Pellet Si PS-101
      • ACH Si PYL-43C
      • ACH Si-ALK-137
      • ACH Si-SUL-69
      • ACH TP-101
      • ACH TP-221
      • ACHWL CER 4221
      • ACH-TPO
    • Blog
    • Contact
  • Home
  • Applications
  • Products
  • Blog
  • Contact

ACH CER 15

Typical Properties

Product Name: ACH CER 15, Cycloaliphatic Epoxy Resins

Chemical Name: 3,4 - Epoxycyclohexylmethyl methacrylate

Molecular Weight: 196.24

CAS RN: 82428-30-6

Specifications: ACH CER 15

Appearance: Colorless to light yellow liquid

Color (APHA): 50 Max

Assay: 95.0% Min

Viscosity, cps: 30 Max

Epoxy EEW, g/g mol: 195 to 215

Water: 0.1% Max

Cl: NR

Na: NR

Fe: NR

K: NR

Mg: NR

Mn: NR

Cu: NR

Al: NR

Ni: NR

Specifications: ACH CER 15 UH

Appearance: Colorless liquid

Color (APHA): 30 Max

Assay: 97.0% Min 

Viscosity, cps: 30 Max 

Epoxy EEW, g/g mol: 195 to 215 

Water: 0.1% Max 

Cl: 100 ppm Max 

Na: 50 ppb Max 

Fe: 50 ppb Max 

K: 50 ppb Max 

Mg: 50 ppb Max 

Mn: 50 ppb Max 

Cu: 50 ppb Max 

Al: 50 ppb Max 

Ni: 50 ppb Max 

Properties

ACH CER 15 is made by our proprietary epoxidation using a special catalyst system. It is low in viscosity and delivers good heat resistance, weatherability, and electrical insulation.


Flash Point: 110 oC (closed cup)

Boiling Point: 274.8 °C at 760 mmHg

Density: (20 oC) 1.079 g/cm3

Applications & Mixing

Applications: 

Used in industrial and electronic applications in low temperature cured liquid & powder coatings. Also, used as a monomer in Cationic UV Powder Coatings, patent pending.


Mixing: 

Please mix thoroughly to obtain best effect. Keep the mixer dry and acid-free prior to mixing.

Safety & Stock, Packaging

Safety and Stock:

Keep in stock as ordinary chemicals. Avoid exposure to air, sunlight, and acid. Wear protective goggles and gloves while using the product. Avoid direct contact with skin and eyes. Use soap to clean if skin contaminated. Minimum storage temperature is -10 oC. Maximum storage temperature is 50 oC. Recommended storage temperature range is 2 oC to 10 oC. Shelf-life: 2 years.


Packaging: 

Available in 200-kg drums or 1000-kg IBC drums, or iso-tankers. 

  • Home
  • 3D Printing
  • Composites
  • Coatings & Inks
  • Adhesives & Sealants
  • Fiber Sizing
  • Blog
  • Contact
  • TPCCShow

Phlex Tek

401 Industrial Drive, Bldg A, North Wales, Pennsylvania 19454, United States

(855) 745-3985

Website & Brand by Minieri & Company

Copyright © 2019 Phlex Tek - All Rights Reserved.