In adhesive applications, Phlex Tek phenoxy based resins offer a wide selection for your chosen technology. Phenoxy resins are used to add superior adhesion promotion to a wide variety of substrates. The large number of secondary hydroxyls give phenoxy the “bite” that many systems require. The linear thermoplastic nature of phenoxy provides flexibility to rigid cross-linked systems.
Additional product details below.
NitroRez ES-P40 is a 40% NV solution of Phenoxy resin in methyl ethyl ketone (MEK) and PMA.
Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous polymers adhesive and cohesive strength, and excellent vapor barrier properties. Phenoxy resins also react with crosslinkers like isocyanates, phenolic & melamine resins along the backbone hydroxyl groups. ES-P40 MEK provides for ease of handling in a pumpable fluid.
ES-P40 MEK can be reduced with additional MEK to attain lower viscosities, however below about 22% solids, the solution becomes unstable. An addition of 1% by weight of water will permit stable solutions below 22% solids. Solutions of ES-P40 MEK can be blended with solvent miscible crosslinkers & hardeners. Coatings of ES-P40 MEK exhibit excellent levels of flexibility and hardness when appropriately cured.
Percent Solids: 40%
Color: 200 MAX (Alpha)
Viscosity – 4500-7000 cP
Mw (av.): 55,000 Daltons
This solution is stable in normal storage conditions. It is flammable and should be stored accordingly. Wear OSHA standard respirators, gloves, and other appropriate PPE when handling large quantities. Consult the product MSDS for additional information on properties, hazards, and handling
55 gallon drums containing 408 lbs.
Phlex Tek personnel have extensive practical experience with polymers for various applications. Please do not hesitate to request our assistance.
PhlexRez ES-P30P is a 30% NV solution of Phenoxy resin in PMA.
Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous polymers adhesive and cohesive strength, and excellent vapor barrier properties. Phenoxy resins also react with crosslinkers like isocyanates, phenolic & melamine resins along the backbone hydroxyl groups. ES-P30 PMA provides for ease of handling in a pumpable fluid.
ES-P30 PMA can be reduced with additional PMA to attain lower viscosities, the addition of MEK will reduce viscosities at a faster rate. The addition of diluents like xylene or toluene is also useful. Solutions of ES-P30 PMA can be blended with solvent miscible crosslinkers & hardeners. Coatings of ES-P30 PMA exhibit excellent levels of flexibility and hardness when appropriately cured.
Percent Solids: 30%
Color: 200 MAX (Alpha)
Viscosity – 5000-15000 cP
Mw (av.): 48,000 Daltons
This solution is stable in normal storage conditions. It is flammable and should be stored accordingly. Wear OSHA standard respirators, gloves, and other appropriate PPE when handling large quantities. Consult the product MSDS for additional information on properties, hazards, and handling
55 gallon drums containing 408 lbs.
Phlex Tek personnel have extensive practical experience with polymers for various applications. Please do not hesitate to request our assistance.
Phlex Tek
100 Berwyn Park, 850 Cassatt Road - Suite 360 - Berwyn, Pa
Website & Brand by Minieri & Company
Copyright © 2019 Phlex Tek - All Rights Reserved.