Product Name: ACHWL CER 4221, Cycloaliphatic Epoxy Resin
Chemical Name: 3,4-Epoxycyclohexylmethyl 3’,4’-Epoxycyclohexanecarboxylate
Molecular Weight: 252.3
CAS RN: 2386-87-0
TSCA: Listed, 2386-87-0
EINECS: Listed, 219-207-4
CER 4221
Appearance: Clear Liquid
Viscosity, cps: 200 – 350
Epoxy EEW, g/g mol: 128 - 145
Color, APHA: 100 max
Moisture, %: 0.05 max
Sodium, ppm:
Total Chlorine, ppm:
Purity by GC, %:
CER 4221 HV
Appearance: Clear Liquid
Viscosity, cps: 400 – 450
Epoxy EEW, g/g mol: 128 - 145
Color, APHA: 100 max
Moisture, %: 0.05 max
Sodium, ppm:
Total Chlorine, ppm:
Purity by GC, %:
CER 4221 E
Appearance: Clear Liquid
Viscosity, cps: 200 – 350
Epoxy EEW, g/g mol: 128 - 145
Color, APHA: 100 max
Moisture, %: 0.05 max
Sodium, ppm: 2 max
Total Chlorine, ppm:
Purity by GC, %:
CER 4221 H
Appearance: Clear Liquid
Viscosity, cps: 200 – 350
Epoxy EEW, g/g mol: 128 - 145
Color, APHA: 100 max
Moisture, %: 0.05 max
Sodium, ppm: 2 max
Total Chlorine, ppm:
Purity by GC, %: 95 min
CER 4221 UH
Appearance: Clear Liquid
Viscosity, cps: 220 – 450
Epoxy EEW, g/g mol: 128 - 145
Color, APHA: 100 max
Moisture, %: 0.05 max
Sodium, ppm: 2 max
Total Chlorine, ppm: 100 max
Purity by GC, %: 97 min
Specific Gravity: 1.175
Boiling Point, °C: 354
Vapor Pressure @ 20°C, mm Hg: < 0.1
Freezing Point, °C: -20
Solubility in Water, %: 0.03
ACHWL CER 4221 is a cycloaliphatic epoxy resin made by our proprietary epoxidation using a special catalyst system. It is a liquid with lower viscosity than epi- and bis- epoxy resins for general purposes and contains no halogen impurities such as chlorine. It gives superior transparency with acid anhydride curing agents and provides cured parts with a high heat-deformation temperature. These properties find uses in applications such as cation or acid cured coatings, electrical-insulating varnishes and sealants for semiconductors. It is also used as the acid scavenger for halogen compounds.
Used for FRPs, electrical-insulating varnishes, electrical-resin porcelains, insulating sealants for semiconductors, transparent insulating sealants for light-emitting diode, ultraviolet-curing coating materials, coating curing agents, and the acid scavenger for resins containing halogen.
Mixing:
Please mix thoroughly to obtain best effect. Keep the mixer dry and acid-free prior to mixing.
Safety and Stock:
Keep in stock as ordinary chemicals. Avoid exposure to air, sunlight, and acid. Wear
protective goggles and gloves while using the product. Avoid direct contact with skin and eyes. Use soap to clean if skin contaminated.
Shelf-life: 36 months.
Packaging:
Available in drums or IBCs or iso-tankers.
Phlex Tek
100 Berwyn Park, 850 Cassatt Road - Suite 360 - Berwyn, Pa
Website & Brand by Minieri & Company
Copyright © 2019 Phlex Tek - All Rights Reserved.